1100 H18 Mirror Aluminum Coil
hiddenValue
- 产品详情描述
-
1100 H18 Mirror Aluminum Coil is a metal material made of aluminum alloy material. It has advantages such as good weather resistance, wear resistance, and corrosion resistance; And the surface has undergone polishing treatment, which has good decorative effect and tactile performance, and is widely used in external insulation engineering of building walls.
Tips for using mirror aluminum coils:
1. Choose the appropriate size:
Determine the area size and thickness of the required mirror panel based on the actual situation of the construction site and design requirements (such as increasing the number of panels when the area is large). Commonly used ones are 1.5m × 2.5mm、2 m × 2 mm、3 m × 3 mm、4 m × Products with different thicknesses such as 5mm, 5 m * 6mm, 6 m * 10 mm, 7 m/12mm, 8 M/16MM, 10 M/20mm, etc. are available for users to choose from.
2. Pay attention to the selection of installation method:
Before pasting ceramic tiles or stones on the wall base, snap lines and take protective measures to prevent damage to the wall structural layer and waterproof layer. At the same time, ensure the flatness and aesthetics of the surface to avoid hollowing. If the mirror panel is directly attached to a concrete wall, it is important to clean the substrate and fix it with special adhesive. If you are directly applying glue to the cement mortar wall and then pasting the lens, you need to treat the base layer before pasting.
3. Reasonably arrange the construction period:
Due to the fact that mirrors belong to special building materials, professional operators are required to carry out operations to ensure optimal quality without affecting normal progress. In addition, it is also necessary to consider the loss caused during transportation to reduce the cost of the product.
4. Control the construction temperature well:
Generally speaking, high and dry summer temperatures can easily lead to problems such as rapid evaporation of water, dry cracking, and deformation. Therefore, it is not advisable to lay mirror aluminum panels on a large area under high temperature conditions. Generally, sunshades should be set up in cool indoor areas to maintain good ventilation and facilitate natural weathering of materials. In winter, heating devices need to be installed outdoors to increase room temperature to ensure the smooth formation and solidification of mirror panels. At the same time, corresponding insulation and antifreeze measures should be taken in low-temperature environments to ensure that product quality is not affected.
5. Strengthen the protection and maintenance of finished products:
For finished mirror aluminum panels, regular inspections should be conducted to check for any damage or damage to avoid unnecessary losses. In addition, it is necessary to regularly wipe the dust and stains on the surface to prevent contamination of the paint film and its loss of luster.Keywords:- 5052-H32 Aluminum coil
关键词：铝板 、铝卷
在线留言
